Technical Specification

Typical Physical Properties of
Tex Sell Corrosion Resistant Mortars / Cements

	Furan Acron	Phenolic Phenon	Silicate Vicron	Jeroplast Polyester	Epoxy Aronel	CNSL Resilex	Biumen Bitrok Mastic	Sulphur Erolex
Standard Colour	Black	Black	Off white	White	Off- white	Black	Black	Black Grey
Mixing Ratio By wt. powder to Resin	3:1	3:1	3:1	3:1	4:1	3:1	170 + onelt Hot melt	Hot Melt
Density gm /cc	1.7	1.68	1.9	1.7	2.00	1.56	2.00	2.1
Compression Strength kgs/cm² 28°Cto 32°C - 7 days	500	450	200	More than 600	600	100	-	250
Flexual Strength Kgs/cm² at 28°Cto 32°C - 7 days	110	95	80	150	150	-	-	-
Bond Strength Kgs/cm² at 28°Cto 32°C at 7 days	10	10	5	12	12	-	-	-
Water absorption %	0.1%	0.3	*8 to 15%	0.6	0.1%	0.3	0.1%	0.1%
Working time at 28°Cto 32°C	35 mints	32 mints	35 mints	30 mints	30 mints	40 mints	-	Hot melt at 130° C
- ---- setting time at 28°Cto 32°C maximum temperature limit	6 to 8 hrs 175°C	4 to 6 hrs 170°C	4 to 6 hrs 950°C	4 hrs 100°C	4 hrs 100°C	8 hrs 175°C	- 60 +90 °C	- 90 to 95°C

* absorption in tolune.

N. B. : Tex Sell Corrosion Proof Mortars are formulated as per climate condition in India. Generally in all season temperature varies from 28°Cto 32°. Accordingly working time of mortars are setup to make covinient to work at site. As per IS 4832 - Part I & II working time of mortars are 20 mints at 27 °C. which is not practicable as per climate of Indian territory. Please contact us for more technical information as regards corrosion resistance data.

Back